• Welcome to SVTPerformance!
ATTENTION!
You may experience intermittent issues while accessing the site over the next 60-90 minutes, as we perform maintenance and upgrades.

need belt help!!!!!

Discussion in 'SVT Shelby GT500' started by svt1.8t, Sep 28, 2009.

  1. svt1.8t

    svt1.8t JDM BUILT BADASS Established Member

    Messages:
    2,885
    Joined:
    Feb 3, 2005
    Location:
    south plainfield, new jersey
    07 gt500 kb 3.0 upper pulley, iw 10% lower pulley what belt #
     
  2. svt1.8t

    svt1.8t JDM BUILT BADASS Established Member

    Messages:
    2,885
    Joined:
    Feb 3, 2005
    Location:
    south plainfield, new jersey
    anyone?
     
  3. black03

    black03 Authorized Vendor Authorized Vendor

    Messages:
    8,192
    Joined:
    Jul 4, 2002
    Location:
    paradise
    EDIT: Sorry I didn't see that it was for a KB. The 100852 works on the stock blower with a 10% overdrive and the 2.9L with a 10% overdrive. Not sure about the KB though.

    Hope all is well bro!

    Jared
     
    Last edited: Sep 29, 2009
  4. svt1.8t

    svt1.8t JDM BUILT BADASS Established Member

    Messages:
    2,885
    Joined:
    Feb 3, 2005
    Location:
    south plainfield, new jersey
    I'll give it a shot
     
  5. Mikey org gt500

    Mikey org gt500 New Member Established Member

    Messages:
    1,049
    Joined:
    Apr 28, 2008
    Location:
    E town NJ
    The car almost done?
     
  6. svt1.8t

    svt1.8t JDM BUILT BADASS Established Member

    Messages:
    2,885
    Joined:
    Feb 3, 2005
    Location:
    south plainfield, new jersey
    very close, still need a belt tho
     
  7. black03

    black03 Authorized Vendor Authorized Vendor

    Messages:
    8,192
    Joined:
    Jul 4, 2002
    Location:
    paradise
    Is the 852 belt too short or too long? If its a little long them just replace the lower left stock idler with a Metco MIP-90 ilder. It will take up the slack. If its too short..... You're gonna need a new belt.
     

Share This Page